B.Tech
(Mechanical Engineering)
B.Tech
(Mechanical Engineering)
Sandip University’s B.Tech in Mechanical Engineering program is designed to create well-skilled engineers in the field of mechanical engineering. These professionals, with their knowledge about wide aspects of engineering, are looked upon to provide efficient solutions to problems faced during the development of processes and products. These can range from very small designs like mobile phones to extremely large plants, machinery, or automobiles.
Sandip University’s Sandip School of Engineering & Technology is one of the leading mechanical engineering colleges in Maharashtra and aims at adding quality mechanical engineers to the industry. Bearing this aim in mind, only 60 students per year make the cut to pursue mechanical engineering at Sandip University.
The B.Tech in Mechanical Engineering course at Sandip University is designed to produce top quality engineers who have a strong understanding of principles of mechanics, dynamics, thermodynamics and designing. The goal is that mechanical engineers from Sandip University should be able to solve problems using mechanical or thermal devices. They should also be able to design and redesign a product using analysis and computer-aided systems.
Mechanical engineering is one of the most ancient fields of engineering. Its ever evolving nature creates a demand for engineers who can predict and solve the issues that erupt related to the mechanics of a product. To keep up with the ever changing demands of the engineering industry and as the best B.Tech Mechanical Engineering colleges in Nashik, Sandip University offers students an industry-compliant curriculum and 100% placement assistance to all students through a massive annual recruitment drive.
Some of the best companies where mechanical engineers can be placed in India are:
If you wish to pursue this course or have any further queries, please call Sandip University’s toll-free number 1800-212-2714.
Course Level | Undergraduate |
---|---|
Duration | 4 years |
Examination Type | Semester System |
Eligibility | Passed 10+2 examination with Physics/ Mathematics / Chemistry/ Computer Science/ Electronics/ Information Technology/ Biology/ Informatics Practices/ Biotechnology/ Technical Vocational subject/ Agriculture/ Engineering Graphics/ Business Studies/ Entrepreneurship as per table1.3(a) Agriculture stream (for Agriculture Engineering) Obtained at least 45% marks (40% marks in case of candidates belonging to reserved category) in the above subjects taken together OR Passed min. 3 years Diploma examination with at least 45% marks (40% marks in case of candidates belonging to reserved category) subject to vacancies in the First Year, in case the vacancies at lateral entry are exhausted. (The Universities will offer suitable bridge courses such as Mathematics, Physics, Engineering drawing, etc., for the students coming from diverse backgrounds to prepare Level playing field and desired learning outcomes of the programme). |
Top Recruiters | Govt. & Private companies |
Area of Work | Machinery manufacturing, Transportation equipment manufacturing |
Top Job Profiles | Jr. Mechanical Engineer, Sr. Engineer, Assistant Engineer, Design Engineer |
Placement ** | Placement Assistant available |
Our vision is to transform Sandip University mechanical Engineering (SAME) into Professionals in the field of Mechanical Engineering to serve the society and industry through the dedicated efforts of highly qualified faculty, able administration, course appropriate laboratory facilities and grooming the students to become world class engineers and ethical societal members
We, at Sandip University envisage the sustainable growth of stake holders :
M1 | To impart quality technical education in Mechanical, Production and Industrial Engineering. |
M2 | To inculcate sustainable managerial skills, research and learning attitudes and social responsibilities. |
M3 | To be committed to fulfill the needs of society in manufacturing and service sector. |
Engineering Graduates will be able to:
PO 1 | Apply the knowledge of mathematics, basic sciences, and mechanical engineering to the solution of complex engineering problems. |
PO 2 | Identify, formulate, study research literature, and analyze complex mechanical engineering problems reaching substantiated conclusions. |
PO 3 | Design solutions for complex engineering problems and design mechanical system components that meet the specified needs. |
PO 4 | Useto interpretation of data and provides valid conclusions. |
PO 5 | Create, select, and apply modern mechanical engineering and IT tools to complex engineering activities with an understanding of the limitations. |
PO 6 | Apply reasoning acquired by the mechanical engineering knowledge to assess societal and safety issues. |
PO 7 | Understand the impact of engineering solutions on the environment, and demonstrate the knowledge for sustainable development. |
PO 8 | Apply ethical principles and commit to professional ethics and responsibilities and norms of the engineering practice. |
At the end of the program, the student
PSO1 | Design Engineering: An ability to design and analyze mechanical elements and processes to predict the behavior of engineering systems. |
PSO2 | Manufacturing Engineering: An ability to apply the principles of manufacturing engineering and technology to develop techno commercial skills. |
PSO3 | Thermal Engineering: An ability to apply fundamentals to design and analyze the thermo-hydraulic systems |
PEO 1 | Classify, analyze, evaluate, design and develop engineered system and processes using appropriate engineering tools and approaches. |
PEO 2 | Demonstrate in-depth knowledge of mechanical systems and work effectively in diverse environments. |
PEO 3 | Build successful careers as [er the need of Indian and multinational industries/ companies. |
Programme | Sem | Year | Mode | Eligibility | Academic Fees Per Year (INR) |
Special Fees (Incl. Library Fee & Examination Fees) Per Year (INR) |
Fees Per Year |
---|---|---|---|---|---|---|---|
School of Engineering & Technology (UG) |
|||||||
B.Tech (Mechanical Engineering) | 8 | 4 | Sem | Passed 10+2 examination with Physics/ Mathematics / Chemistry/ Computer Science/ Electronics/ Information Technology/ Biology/ Informatics Practices/ Biotechnology/ Technical Vocational subject/ Agriculture/ Engineering Graphics/ Business Studies/ Entrepreneurship as per table1.3(a) Agriculture stream (for Agriculture Engineering) Obtained at least 45% marks (40% marks in case of candidates belonging to reserved category) in the above subjects taken together OR Passed min. 3 years Diploma examination with at least 45% marks (40% marks in case of candidates belonging to reserved category) subject to vacancies in the First Year, in case the vacancies at lateral entry are exhausted. (The Universities will offer suitable bridge courses such as Mathematics, Physics, Engineering drawing, etc., for the students coming from diverse backgrounds to prepare Level playing field and desired learning outcomes of the programme). |
Rs. 65,000 /- | Rs. 10,000 /- | Rs. 75,000/- |
School of Engineering & Technology (UG-Lateral Entry) |
|||||||
B.Tech(Mechanical Engineering) | 6 | 3 | Sem | Passed Minimum Three years/Two years (Lateral Entry) Diploma examination with at least 45% marks (40% marks in case of candidates belonging to reserved category) in Any branch of Engineering and Technology. OR Passed B.Sc Degree from recognised University as defined by UGC, with at least 45% marks (40% marks in case of candidates belonging to reserved category) and passed 10+2 examination with Mathematics as a subject. OR Passed D.Voc. Stream in the same or allied sector. (The Universities will offer suitable bridge courses such as Mathematics,Physics,Engineering drawing etc, for the students coming from diverse backgrounds to achieve desired learning outcomes of the programme) Refer table 1.10 of Appendix-1 |
Rs. 65,000 /- | Rs. 10,000 /- | Rs. 75,000/- |
Sr.No. | Event type | Title of Event | Date | Event Details | Coordinators |
1. | Workshop | Aptitude and Softskill | 12/09/2022 - 17/09/2022 | Workshop Arranged by Central Training and Placement | Mr. Durgesh Borse |
2. | Workshop | IPR Patent and design pending | 06.09.22 | Kumar Raju, Asst controller of patent & design, IPO Mumbai, RGNIIPM Nagpur | Mrs. S. A. Shirke, Mr D Y Borse |
3. | FDP | Industry 5.0:Next wave of Technology | 10.01.2022 to 14.01.2022 | National Level one week FDP | Dr. Anand S. Relkar |
4. | Expert Talk | Entrepreneurship Development | 28.04.2022 | For SE, TE & BE students | Dr. Anand S. Relkar |
5. | Training Program | IRINS Awareness Program | 15.10.2022 | Increasing IRINS instance, Vidwan Portal etc awareness amongst faculty of SUN | Dr.Anand S. Relkar & Dr. Yogesh Pahariya |
5. | Training Program | Basic of 5S implementation | 20.03.2022 | 5S implementation at Shreevardhan Induatries, Sinner | Dr. Anand S. Relkar |
6. | Training Program | Total Quality management | 20.10.2022 | How to implement TQM in industry | Dr. Anand S. Relkar |
7. | Training Program | Total Productive Management | 18.11.2022 | To improve machine efficiency | Dr. Anand S. Relkar |
8 | ATAL STTP | Research Methodology and Optimization Techniques | 13.12.20212 TO 17.12.2021 | Resource Person in one week STTP at Govt. Polytechnique, Samangaon | Dr. Anand S. Relkar |
9 | Workshop | workshop for building interview skillls | 23.01.20 to 25.01.20 | Osden N. D’Mello, B.E (Computer Science), DMM, MBA (Marketing Mumbai University) | Dr. V.N. Sulakhe |
10 | Seminar | Webinar on Recent advancement and current trends in Heat Exchangers | 18.12.2021 | Dr D D Palande, Professor at Matoshree college of engineering | Mrs. S.A. Shirke |
11 | Seminar | "Current Trends and Job Opportunities in Mechanical Engineering" | 23 Oct 2021 | Dr A Muthuraja, Ph. D | Dr. V.N. Sulakhe |
12 | Expert talk | Expert lecture on Application of Design Expert Software for DOE. | 20 Oct 2019 | Dr.Abubakar Jumare, Research Associate | Dr. V.N. Sulakhe |
13 | Expert talk | Expert talk: ‘Preparation – Campus Drive 2022’. | 24 Jan 2020 | Associate professor and trainer - soft skills , Sandip University | Dr. V.N. Sulakhe |
14 | Training | “Awareness of CATIA Software” | 25 Sept 2019 | Mr. Swapnil Deshmukh, Application Engineer, EDS Technologies Mr. Sagar Dhawale, Business Manager, EDS Technologies | Dr. V.N. Sulakhe |
15 | Expert talk | Expert talk on personality development | 29 May 2021 | Mr. Amit Tekwani from Mahindra and Mahindra | Dr. V.N. Sulakhe |
16 | Training | non conventional methods in manufacturing and also got to know about the use of AI and ML in manufacturing sector and robotics in manufacturing | 30May 2021 | Dr. Ketan Jagtap, (DME, BE, M.Tech, PhD Manufacturing). | Dr. V.N. Sulakhe |
17 | Expert talk | Expert talk on Resume writing and interview skills | 5 June 2021 | Dr.Prafulla Hatte (Dean Of School Of Mechanical & Civil Engineering , Alandi, Pune) | Mrs. S.A. Shirke |
18 | Expert talk | Guest lecture on “You are a product, How to enhance your employability” | 22 Jan 2020 | Mr. Jay Naidu, Consultant for the state of Maharashtra for BothBridge Educational Services Pvt Ltd, Chennai. | Dr. V.N. Sulakhe |
19 | Expert talk | “Guest lecture on Entrepreneurship Awareness” | 21 Jan 2020 | Mr. Vikrant Ugale, Director, Curry Leaves group of Hotels | Mrs. S.A. Shirke20 |
20 | Expert talk | Experts talk on ‘Opportunities in R & D and simulation Processes’. | 20 Jan 2020 | Mr. Mahesh Hadpe (Director of HM Technologies) | Mrs. S.A. Shirke |
21 | Workshop | Industrial visit to Indian tools Pvt Ltd | 03 Feb 2020 | Indian Tools Pvt Ltd, Satpur MIDC, Satpur | Mrs. S.A. Shirke |
22 | Industrial Visit | Industrial Visit of Sahyadri Farms | 05 Feb 2020 | Sahyadri fartms, Dindori, nashik | Mrs. S.A. Shirke |
23 | Workshop | Assembly, Dismantling and troubleshooting of automotive engines | 25 sept 2019 | Mr. Kshitij Kamble Mr.Rupesh Kadam, Mr. Kishor Shiware and Mr.Kaplesh Bhalerao. | Dr. V.N. Sulakhe |
24 | Expert talk | Expert talk on ‘Opportunities in Media and Entertainment for Engineers’. | 17 Sept 2019 | Mr Dilip shinde, Actor Director | Dr. V.N. Sulakhe |
25 | Expert talk | Expert lecture on healthy lifestyle | 25 Feb 2022 | Sandip University, NAshik | Mrs. S.A. Shirke |
26 | Expert talk | Motivational expert lecture | 26 March 2022 | Dr. Milind Beldar from Panchaamrut Wellness Pvt. Ltd | Mrs. S.A. Shirke |
27 | Expert talk | Expert lecture on Entrepreneurship | 26 Feb 2022 | Dr V N Sulakhe, HoD, Mechanical Dept, SOET, SUN | Mrs. S.A. Shirke |
28 | wWorkshop | Barclay's Rubicon Workshop for Building Interview Skills" | 20 sept to 22sept 2021 | Mr. Prasad Kumavat (Beldar) from Jaygurudev Industries. | Mrs. S.A. Shirke |
29 | Workshop | Workshop entitled " Awareness about Solidworks software and its applications" | 28 Jan 2020 | Elvis D’Silva, 2) Kadambari Y Dadhich, Trainer | Dr. V.N. Sulakhe |
30 | Training | Placement Registration of HireMee AI Assessment program | 12 Oct 2019 | Mr. Purushottamdas Upadyay Engineer Addonix Technologies Pvt. Ltd | Dr. V.N. Sulakhe |
31 | Expert talk | Expert talk on "Career Opportunities for Engineers in Indian Air Force | 30 July 2019 | Mr. Saurabh Kerhalkar, Senior Territory Manager, HireMee, Bengluru, karnataka | Dr. V.N. Sulakhe |
32 | Exhibition | ISRO Exhibition visit at Ashoka group of Schools, Chandsi, Gangapur Road, Nashik | 04 Oct 2019 | Gp Capt Ajay Menon, Chief Test Pilot at 11BRD, Air Force, Capt Parveen Kaur, Squadron Leader, Administration. | Dr. V.N. Sulakhe |
33 | Expert talk | Expert talk on "Mode Shape & Modal Analysis of Mechanical Component | 14 Sept 2019 | Sandip University, NAshik | Dr. V.N. Sulakhe |
34 | Workshop | Report on Swachhata Pakhwada ( commited towards a swachh Bharat) under the minstry og human resources and development | 25,25 & 27 Jan 2020 | Mr Kunal Shinde, Sandip Foundation | Dr. V.N. Sulakhe |
35 | Expert talk | Expert lecture on Quality management System andISO | 26 April 2022 | Prof George, HoD Aerospace Dept | Mrs. S.A. Shirke |
36 | Skill Training | Skill Module on Maintenance of Air Conditioning System. | 4 & 5 Oct 2019 | Mr Sangram Desai, Director Global Managemet System | Mrs. S.A. Shirke |
37 | Workshop | “Workshop/Training on AutoCAD” | 13 Oct 2019 | Mr Vaibhav Joshi - Member of ISHRAE (Indian Society of Heating, Refrigeration and air conditioning Engineeris | Dr. V.N. Sulakhe |
38 | Expert talk | Expert lecture on healthy lifestyle | 25 Feb 2022 | Mr. Yogesh Lathe, Director, & Ms. Rucha Babulkar, Apollo Institute, Nashik | Mrs. S.A. Shirke |
39 | Expert talk | Motivational expert lecture | 26 March 2022 | Dr. Milind Beldar from Panchaamrut Wellness Pvt. Ltd | Mrs. S.A. Shirke |
40 | Expert talk | Expert lecture on Entrepreneurship | 26 Feb 2022 | Dr V N Sulakhe, HoD, Mechanical Dept, SOET, SUN | Mrs. S.A. Shirke |
Sr. No. | Name of Chapter | Activity Conducted | Date of Activity | Name of coordinator |
1 | SAME President | SAME Election | 03/09/22 | Jay Joshi (BE) |
2 | SAME Vice President | Schedule of Seminar | 11/09/22 | Lalit Patil (TE) |
3 | General Secretary | SAME meetings | 13/09/22 | Ayush Sharma (BE) |
4 | Ttreasurer | SAME meetings for Expert talk | 24/09/22 | Yashraj Baviskar (TE) |
5 | Event Management | SAME meetings | 25/09/22 | Prathamesh (TE) |
6 | Design | SAME meetings | 07/10/22 | Yashraj Baviskar(TE) |
7 | Sport Management | SAME meetings | 10/10/22 | Joel (BE) |
8 | Decoration | Schedule of Seminar | 14/10/22 | Suraj Yadav (BE) |
9 | Hospitality | SAME meetings for Expert talk | 17/10/22 | Asif Khan (BE) |
10 | Sponsorship | Schedule of Seminar | 20/10/22 | Pratik Kadam (BE) |
11 | Poster | SAME meetings | 25/10/22 | Shantanu Wagh (BE) |
12 | Social Media | SAME meetings | 29/10/22 | Kunal Yeole (BE) |
Sr. No. | Name of Chapter | Activity Conducted | Date of Activity | Name of coordinator |
1 | SAME President | SAME Election | 05/09/21 | Kiran Kumavat (BE) |
2 | SAME Vice President | Schedule of Seminar | 14/09/21 | Anuj Nikam (TE) |
3 | General Secretary | SAME meetings | 13/10/21 | Prajwal Rudraksh (BE) |
4 | Ttreasurer | SAME meetings for Expert talk | 20/10/21 | Om Kasave (TE) |
5 | Event Management | SAME meetings | 25/10/21 | Sanket Patil (TE) |
6 | Design | SAME meetings | 10/11/21 | Yashraj Baviskar(TE) |
7 | Sport Management | SAME meetings | 24/11/21 | Joel (BE) |
8 | Decoration | Schedule of Seminar | 10/12/21 | Chirag (BE) |
9 | Hospitality | SAME meetings for Expert talk | 16/12/21 | Asif Khan (BE) |
10 | Sponsorship | Schedule of Seminar | 25/12/21 | Pratik Kadam (BE) |
11 | Poster | SAME meetings | 05/01/22 | Bhupendra Bagul (BE) |
12 | Social Media | SAME meetings | 29/01/22 | Om Kasave (BE) |
Session | Value added courses |
2021-22 | 2 |
2020-21 | 1 |
2019-20 | 1 |
Sr. No. | Name of Activity and its Details | Duration | Dept Coordinator | Coordinator details | Number of participants |
1. | Training on Industrial Automation & Robot | 60 Hrs | Mrs S A Shirke | Kaustya Robotics Limited | 34 |
2. | Training on CATIA Global certification | 60 Hrs | Mrs S A Shirke | CAD CAM Guru | 33 |
Sr. No. | Name of Activity and its Details | Duration | Dept Coordinator | Coordinator details | Number of participants |
1 | Solidworks Training | 24 Hours | Dr. A. D. Lokhande Mr. G.E.Chavan Mr. D. R. Satpute | Addonix Technologies Pvt. Ltd | 36 |
Sr. No. | Name of Activity and its Details | Duration | Dept Coordinator | Coordinator details | Number of participants |
1 | Skill Development AUTOCAD, Maintenance of AC, Two Wheelers | 90 Hours | Mr. D. R. Satpute | 52 |
Sr. No | Name of Dept. | Name Of Faculty | Details |
1 | Mechanical | Dr. Anand S. Relkar |
|
2 | Mechanical | Dr. V. N. Sulakhe | 2. Dr. V. N. Sulakhe Received "Academic Excellence Award-2017" for contributing in education at ICSESD, Bangkok in association with the University of London and Institution of Engineers, Amravati Local Centre, India, on 28th May 2017. |
3 | Mechanical | Dr. V. N. Sulakhe | 3. Dr. V. N. Sulakhe received "Best Paper Award" for a paper entitled "Parametric Optimization of EDM Process through WC-Cu Composite Electrode", at IEEE ICONSTEM 2016 at Jeppiaar Engineering College, Chennai, Tamilnadu, India, on 30th - 31st March 2016. |
4 | Mechanical | Dr. V. N. Sulakhe | 4. Dr. V. N. Sulakhe received "Best Paper Award" for a paper entitled "Some Investigations into EDM of D2 Tool Steel Using Different Composite Electrode Materials", at ICRTRES-2016 VB Kolte College of Engineering, Malkapur India, 28th - 29th Feb 2016. |
5 | Mechanical | Dr. V. N. Sulakhe | 5. Dr. V. N. Sulakhe received "Best Paper Award" for a paper entitled "Statistical Analysis on MRR and Ra in EDM of HcHcr D2 Tool Steel Using AlSiC Composite Electrode", NCETET-2016, BVCOE, Kolhapur, India, 1st March 2016. |
6 | Mechanical | Prof Dr A S Maheshwari | 6. Prof Dr A S Maheshwari Received "I2OR National Eminent Academic Leader Award 2020" instituted by the International Institute of organized Research (I2OR) which is a registered MSME with the Ministry of Micro, Small and Medium Enterprises, Government of India and is advocating Academic and Research Programs for API and Career Advancement Scheme on 9th Dec 2020 |
7 | Mechanical | Prof Dr A S Maheshwari | 7. Prof Dr A S Maheshwari Received fellow membership of the of International Institute of Organized Research (I2OR) w.e.f. May 2021 |
8 | Mechanical | Prof Dr A S Maheshwari | 8. Prof Dr A S Maheshwari Received " Guru Ratna Award" for his contribution in field of education on 5th Sept 2020 |
Session | Competition | Awards |
2021-22 | 02 | 04 |
2020-21 | 01 | 01 |
2019-20 | 01 | |
2018-19 | 03 | 03 |
2017-18 | 02 | 02 |
Sr. No. | Name of students | Title of event | Prizes received if any | Dates |
1 | Sanket Tukaram Tekade | GRE, TOUFEL | ||
2 | Ratnakant Borkar | Placed in BYJU’s | 10LPA | |
3 | Gaurav Rajendra Borkar | Placed in BYJU’s | 10LPA | |
4 | Mithilesh Devidas Pagar | Placed in BYJU’s | 10LPA | |
5 | AKSHAT JAIN, VISHAL PATIL, Kartik Prajapati | INSIGHT 2k22 organized by SOET, Sandip University, Nashik | First Prize in Project Competition | 11 May 2022 |
6 | Owes Shaikh, Kamil Rizvi, Yash Khoriya | INSIGHT 2k22 organized by SOET, Sandip University, Nashik | First Prize in Project Competition | 11 May 2022 |
7 | Pranav Anil Mandlik | HOCHSCHULE University of applied Science, Germany | Went for MS | |
8 | Teas Sanjay Patil | HOCHSCHULE University of applied Science, Germany | Went for MS | |
9 | Prathmesh Ajay Kapdane | HOCHSCHULE University of applied Science, Germany | Went for MS | |
10 | Aashutosh Sunil Patil, | Home First Finance Company India Ltd. | 5.25LPA | May 23 |
11 | Shubham R Vishwakarma | Federal Bank | 5.54LPA | May 23 |
Sr No | Name of Dept | Name of Organisation | Date of MOU | Purpose |
---|---|---|---|---|
1 | Mechanical | Hindavi Industries | JAN 2023 | Internship & Projects |
2 | Mechanical | CADMAX | Sept.2021 | Internship & Projects |
3 | Mechanical | Kaustya Robotics Limited | Sept.2021 | Training/Placement/project |
4 | Mechanical | CADCAM Guru Solutions Private Ltd | Sept.2021 | Training/Placement/project |
5 | Mechanical | Mechatol Engineering Solutions | June 2019 | Internship & Projects |
6 | Mechanical | Delta Magnet Limited and MMG Private Ltd. | June 2019 | Training/Placement/project |
S.NO | Name of author | Dept | Title of Paper | Conference / Journal Name ( with issue, volume, page, year |
1 | Mr. Durgesh Borse | Mechanical | A Review Paper On Gyroscopic Effect Ontransportation | International Conference On Emerging Trends And Innovation In Engineering And Science |
2 | Mr. Durgesh Borse | Mechanical | Review Paper On Aerial Ropeway Technologies Used Around The World | International Conference On Emerging Trends And Innovation In Engineering And Science |
3 | Mr. Durgesh Borse | Mechanical | Review On Different Types Of Clutch | International Conference On Emerging Trends And Innovation In Engineering And Science |
4 | Mr. Durgesh Borse | Mechanical | Effects Of Gasoline Direct Injection On Two-Stroke Engine: Review Paper | International Conference On Emerging Trends And Innovation In Engineering And Science |
5 | Mr. Akshay Tajane | Mechanical | A Review On Continuously Variable Transmissions (CVT) | IJARIIE |
6 | Mr. Akshay Tajane | Mechanical | Fea Analysis Of Chain Link For Finding Optimization Parameters | IJARIIE |
7 | Mr. Akshay Tajane | Mechanical | Review On Investigation In Wear Of Polyoxy methylene Composites By Using Tribometer | IJMTER |
8 | Mr. Akshay Tajane | Mechanical | ‘Effect Of Electrode Geometrical Parameters In Die Sink EDM: A Review’ | IJARIIE |
9 | Mr. Akshay Tajane | Mechanical | Design And Testing Of Automobile Exhaust System | International Journal Of Research In Engineering And Technology |
10 | Mr. Akshay Tajane | Mechanical | Effects Of Gasoline Direct Injection On Two-Stroke Engine: Review Paper | International Conference On Emerging Trends And Innovation In Engineering And Science |
11 | Dr. Anand S. Relkar | Mechanical | Pochamatic Every Smart Home Deserve It | Internal Journal Of Engg. Research & Technology |
12 | Dr. Anand S. Relka | Mechanical | Design & Fabrication Of Portable Automatic Glass Wall Cleaner | Internal Journal Of Engg. Research & Technology |
13 | Dr. Anand S. Relka | Mechanical | Design & Fabrication Of Qwalking Bot-Theo Jonson Walking Mechanism | Internal Journal Of Engg. Research & Technology |
14 | Dr. Anand S. Relka | Mechanical | Design & Fabrication Of Arduino Based Flexible Manufacturing Process On The Desk:3D Printing | International Journal For Research In Applied Science & Engg. Technology |
15 | Dr. Anand S. Relka | Mechanical | Experimental Study On The Effect Of Cleaning Agent Pressure On The Cleaning Process | International Journal For Research Trends And Innovation (IJRTI) |
16 | Dr. Anand S. Relka | Mechanical | Design And Fabrication Of Door Hinges Mechanism | International Research Journal Of Engg. & Technology |
17 | Dr. Anand S. Relka | Mechanical | Material Optimization Of Wheel Rim Using Finite Element Analysis | International E-Conference On Current Trends In Multidisciplinary Research |
18 | Dr. Vinay Kumar | Mechanical | Optimization Of Drilling Parameters Using Taguchi Technique | International Conference On Emerging Trends And Innovation In Engineering And Science |
19 | Dr. Vinay Kumar | Mechanical | Review Paper On Supply Chain Management | International Conference On Emerging Trends And Innovation In Engineering And Science |
20 | Dr. Vinay Kumar | Mechanical | REVIEW PAPER OF WEAR ON JOURNAL BEARING | International Conference On Emerging Trends And Innovation In Engineering And Science |
21 | Dr. Vinay Kumar | Mechanical | Development Of Automotive Tyre Inflation System Used In Vehicle | International Conference On Emerging Trends And Innovation In Engineering And Science |
22 | Mrs S A Shikre | Mechanical | Experimental Study & Analysis of Diesel - Jatropha Biodiesel Blend on VCR Engine | IJSART |
23 | Mrs S A Shikre | Mechanical | Agriculture 3 In One Mechanism- Harvesting, Spraying, Seeding | International Conference On Emerging Trends And Innovation In Engineering And Science |
24 | Mrs S A Shikre | Mechanical | Optimization Of Upper Control Arm Of Suv | International Conference On Emerging Trends And Innovation In Engineering And Science |
25 | Mrs S A Shikre | Mechanical | Waste Management And Future Scope In Road Cleaning Machine | International Conference On Emerging Trends And Innovation In Engineering And Science |
26 | Mrs S A Shikre | Mechanical | Effects Of Gasoline Direct Injection On Two-Stroke Engine: Review Paper | International Conference On Emerging Trends And Innovation In Engineering And Science |
27 | Dr A D Lokhande | Mechanical | Review of Product Lifecycle Management Tools Used in Manufacturing Industry | Environmental Science and Engineering, |
28 | Dr A D Lokhande | Mechanical | Recycling Process Impact in Current Scenario Manufacturing: A Study | Recent trends in Management and Commerce |
29 | Dr A D Lokhande | Mechanical | A Review Paper on Analysis and Performance Evaluation of Vehicle Crash Box for Material and Shape Optimization | The International journal of analytical and experimental modal analysis |
30 | Dr A D Lokhande | Mechanical | A Review Paper on Analysis and Performance Evaluation of Vehicle Crash Box for Material and Shape Optimization | Journal of Emerging Technologies and Innovative Research (JETIR) |
31 | Dr A D Lokhande | Mechanical | Industrial Applications of Fourier Transform In Engineering Field | Data Analytics and Artificial Intelligence |
32 | Dr A D Lokhande | Mechanical | FINITE ELEMENT ANALYSIS OF HEXAGONAL SHAPE CRASH BOX OF LINEAR AND TAPER GEOMETRY USED IN VEHICLE | International Journal of Research and Analytical Reviews |
33 | Dr A D Lokhande | Mechanical | Shock Experimentation of a Direct Oil Heater Used In Ships | International Journal of Recent Technology and Engineering (IJRTE) |
34 | Dr A D Lokhande | Mechanical | A Review on Various Implications on Re engineering in Manufacturing | Journal on Emerging trends in Modelling and Manufacturing |
35 | Dr A D Lokhande | Mechanical | Structural Analysis of Electric Three-Wheeler Chassis | Compliance Engineering Journal |
36 | Dr A D Lokhande | Mechanical | Optimization of Weight for Spring of Two-Wheeeler Suspension Issuing Composite Material | The Mattingley Publishing |
37 | Dr A D Lokhande | Mechanical | Theoretical simulation and Implentationof polymer Composite Material in Automobile for Low and Medium Velocity Impact Frontal Collision | GIS Science Journal |
38 | Dr A D Lokhande | Mechanical | An Study of Finding Critical Success Factors and Organ izational Performance Factors use for Remanufacturing Industry | ICIE |
39 | Dr A D Lokhande | Mechanical | Review Paper on Flow through Venturi in Carburetor | The International journal of analytical and experimental modal analysis |
40 | Dr A D Lokhande | Mechanical | A Review paper on Analysis and Performance Evaluation of Vehicle Crash Box for Material and Shape Optimization | The Journal of Analytical and Experimental model analysis |
41 | Dr A D Lokhande | Mechanical | performance Evcaluation of Circular and Hexagonal Shaped Crash Box for Improvced Passenger's Safety | JETIR |
42 | Dr A D Lokhande | Mechanical | Optimization of Weight for Spring of Two-Wheeeler Suspension Issuing Composite Material | IJRTE, Blue Eyes Interlligence Engineering & Sciences Publication |
43 | Dr A D Lokhande | Mechanical | A study on Carbon Fiber Based Polymer Rein Force composites | Journal on Emerging trends in Modelling andManufacturing |
44 | Dr A D Lokhande | Mechanical | A Review on Biodiesel Properties and Fatty acid composites | Journal on Emerging trends in Modelling andManufacturing |
45 | Dr A D Lokhande | Mechanical | A Study on Various Implications on Reusing in Manufacturing | Journal on Emerging trends in Modelling andManufacturing |
46 | Shinde Dnyandeo Dattatraya , Ramjee Prasad | Mechanical | Total Productive Education : Model for Higher Technical Education | River Publication |
47 | Dr.A.D.Lokhande | Mechanical | A Review Paper on The Effect of Heat Input and Speed on Residual Stress During Welding | IJAEMA JOURNAL |
48 | Dr.A.D.Lokhande | Mechanical | A Review Paper on Flow through ventrui in carburetor | IJAEMA JOURNAL |
49 | Dr.A.D.Lokhande , Prof.D.S.Dhondge ,Darshan Patil | Mechanical | A Review Paper on The Effect of Heat Input and Speed on Residual Stress During Welding | The International journal of analytical and experimental modal analysis |
50 | Sulakhe Vishal N. | Mechanical | Introduction to Semi- synthetic and synthetic and synthetic fibers-based composites | Wiley Publication, Lodon |
51 | Dnyandeo Shinde | Mechanical | Design And Experimental Analysis of Tooth Impact Test Rig for Spur Gear | IFERP |
52 | Dnyandeo Shinde | Mechanical | Design And Fabrication of Automated Waste Segregation Machine | IFERP |
53 | Dnyandeo Shinde | Mechanical | A Review on Aeration System Designfor Optimum Level | IFERP |
54 | Dnyandeo Shinde | Mechanical | Pneumatic Sealing Machine for Plastic Housing | IFERP |
55 | Dnyandeo Shinde | Mechanical | Study and analysis of single point cutting tool | IFERP |
56 | Dnyandeo Shinde | Mechanical | Hybrid Electric Vehicle | IFERP |
57 | Dnyandeo Shinde | Mechanical | Higher Technical Education and Employment | IFERP |
58 | Shinde Dnyandeo Dattatraya , Ramjee Prasad | Mechanical | Mobile Learning : Steps towards Transforming Traditional Learning to e-learning | IJETT |
59 | Mr.Bhushan Magar,Dr.Amol Lokhande , Mr.Gokul Mahajan | Mechanical | Structural Analysis of Electric Three-Wheeler Chassis | Compliance Engineering Journal |
60 | Dr.Amol Lokhande | Mechanical | Structural Analysis of Electric Three-Wheeler Chassis | Compliance Engineering Journal |
61 | Rajendra Singh Rajput , Anshul Gangele ,Arun Singh Kushwah | Mechanical | Optimization of Polynomial Cam Follower Profile of Direct Injection Diesel Engine | IJAST |
62 | Bhushan Magar, Anshul Gangele , Gokul Mahajan | Mechanical | Electric Three-Wheeler : A Next-Gen Transport System for Developing Countries | Blue Eyes Interlligence Engineering & Sciences Publication |
63 | Sneha Jagtap | Mechanical | Experimental Study & Analysis of Diesel - Jatropha Biodiesel Blend on VCR Engine | IJSART |
64 | Sneha Jagtap | Mechanical | In recognition of publication of the paper entitled | IJSART |
65 | D.S.Dhondge ,K.P.Pawar, A.S.Maheshwari,N.L.Bhirud,G.V.Mahajan ,A.D.Lokhande | Mechanical | Optimization of Weight for Spring of Two-Wheeeler Suspension Issuing Composite Material | The Mattingley Publishing |
66 | Prashant D.Chaudhari,Dr.Anil S.Maheshwari | Mechanical | Design of Multipurpose Auto Alignment Maunted on Portable Trolley | The Mattingley Publishing |
67 | Prashant D.Chaudhari,Dr.Anil S.Maheshwari | Mechanical | Design of Multipurpose Auto Alignment Maunted on Portable Trolley | The Mattingley Publishing |
68 | D.S.Dhondge ,K.P.Pawar, A.S.Maheshwari,N.L.Bhirud,G.V.Mahajan ,A.D.Lokhande | Mechanical | Optimization of Weight for Spring of Two-Wheeeler Suspension Issuing Composite Material | The Mattingley Publishing |
69 | Sushant Arvind Sonawane ,Dr.Anil S.Maheshwari | Mechanical | Review paper on onion leaf cutting Machine | JETIR |
70 | Prashant D.Chaudhari,Dr.Anil S.Maheshwari | Mechanical | Vertical Lifting System - Scissor Lift: A Review | JETIR |
71 | Shubham D.Choudhary,Dr.Anil S.Maheshwari,Prof.D.S.Dhondge | Mechanical | Review on : Study of Design and Structural Analysis of Femur Bone | JETIR |
72 | Shubham D.Choudhary,Dr.Anil S.Maheshwari,Prof.D.S.Dhondge | Mechanical | Design and Structural Analysis of Femur Bone Manufactured by Rapid Prototyping | GIS Science Journal |
73 | Mr.Shaikh Zeeshan Akil,Prof.(Dr) Anil S.Maheshwari,Prof.(Dr) Anshul Gengale, Prof.(Dr) Amol L.Lokhande | Mechanical | Theoretical simulation and Implentationof polymer Composite Material in Automobile for Low and Medium Velocity Impact Frontal Collision | GIS Science Journal |
74 | Shinde Dnyandeo Dattatraya , Ahirrao Shwetambari Sanjay | Mechanical | Identifying Root Causes for Students Problems in Technical Education using Fishbone Diagram | |
75 | Prashant D.Chaudhari,Dr.Anil S.Maheshwari | Mechanical | Vertical Lifting System - Scissor Lift: A Review | JETIR |
76 | Dinesh R Satpute | Mechanical | Heat Dissipation Analysis of Polyurethane Bonnet Uoam By using Ansys | IJRAR |
77 | Bhushan M Dusane | Mechanical | Heat Dissipation Analysis of Polyurethane Bonnet Uoam By using Ansys | IJRAR |
78 | Sunisha S Bachhav | Mechanical | Heat Dissipation Analysis of Polyurethane Bonnet Uoam By using Ansys | IJRAR |
79 | Gokul V Mahajan | Mechanical | Heat Dissipation Analysis of Polyurethane Bonnet Uoam By using Ansys | IJRAR |
80 | Tanamymani K Sharma | Mechanical | Heat Dissipation Analysis of Polyurethane Bonnet Uoam By using Ansys | IJRAR |
81 | Gokul V Mahajan | Mechanical | Heat Dissipation Analysis of Polyurethane Bonnet Uoam By using Ansys | IJRAR |
82 | Dnyandeo D.Shinde , Ramjee Prasad | Mechanical | Digital Transformation inTechnical Education | Int Symposium on Wireless Personal Multimedia Communications |
83 | Amol D.Lokhande, Niteen L.Bhirud,Gokul V.Mahajan ,Govind E.Chanvan,Dinesh R.Satpute | Mechanical | Shock Experimentation of a Direct Oil Heater Used In Ships | Blue Eyes Interlligence Engineering & Sciences Publication |
84 | Hrishikesh N.Bagul, Dnyandeo Shinde | Mechanical | A Review on Assembly Line Balancing Development | JETIR |
85 | Amol D.Lokhande, Niteen L.Bhirud,Gokul V.Mahajan ,Govind E.Chanvan,Dinesh R.Satpute | Mechanical | Shock Experimentation of a Direct Oil Heater Used In Ships | Blue Eyes Interlligence Engineering & Sciences Publication |
86 | Amol D.Lokhande | Mechanical | An Study of Finding Critical Success Factors and Organ izational Performance Factors use for Remanufacturing Industry | ICIE |
87 | Anil S. Maheshwari ,Vaibhav D.Shinde, Nikhil K. Kshirsagar, Mahes D. Malkar Juned F. Deshmukh | Mechanical | Design and Manufacturing of Manual Mulching Machine | IJARIIE |
88 | Dnyandeo D.Shinde , Ramjee Prasad | Mechanical | Triangular mode: Ultimate regime to enhance efficacy in the Technical education | JETIR |
89 | Anand S.Relkar , Prasad R.Baviskar , Milind M.Patil | Mechanical | Application of Monte Carlo and regression analysis technique in maintenance management | The AmericanInstitute of Physics |
90 | Anand S.Relkar, Prasad R. Baviskar | Mechanical | Maintenance Strategics development for improving overall equipment effectveness (OEE) by Integrating Monte Carlo (MC) Nd Genetic Algoritham (GA) | |
91 | Anshul Gangele , Ajay Mishra | Mechanical | Surface Roughness Optimization During Machining Of Niti Shape Memory Alloy By EDM Through Taguchi's Technique | Elsevier Ltd. |
92 | Amol D.Lokhande, Niteen L.Bhirud,Gokul V.Mahajan ,Govind E.Chanvan,Dinesh R.Satpute | Mechanical | Shock Experimentation of a Direct Oil Heater Used In Ships | IJRTE |
93 | Mikhil Bhavsar | Mechanical | A Creative support professional with a record of increased responsibility in education sector. Enjoys learning new programs and processes. A team player wheo is attentive to detail and love to work in a fast-paced environment.He has completed masters of Engineering in Design Engineering | Lambert Academic Publishing |
94 | Gokul V Mahajan | Mechanical | Design and Optimization of Gripper Engine Block Manipulator | Lambert Academic Publishing |
95 | Dnyandeo D.Shinde ,Manas Srivastava, Ramjee Prasad | Mechanical | An Initiative to Enhance Productivity in Higher Education (Technical ) using Yoga which interconnect human mind and body | IEEE` |
96 | Dnyandeo D.Shinde, Shwetambari Ahirrao , Ramjee Prasad | Mechanical | Fishbone Diagram: Application to Identify the Root Causes of Student-Staff Problems in Technical Educaion | Wireless Personal Communications |
97 | Amol D.Lokhande, Niteen L.Bhirud,Gokul V.Mahajan ,Govind E.Chanvan,Dinesh R.Satpute | Mechanical | Shock Experimentation of a Direct Oil Heater Used In Ships | IJRTE |
98 | Apurva Kahane,Niraj Chordiya,Chetan Jain,Abhishek Deore,Anil Maheshwari | Mechanical | Comparative Study Of Ball And Roller Burnishing | IJCRT |
99 | Vishal N.Sulakhe,Rajendra S.Dalu,Nitin Seth, Pravin Sharma,Neha Sanghai | Mechanical | Influence of powder-mixed dielectric on MRR and TWR in EDM Process | The American Institute of Physics |
100 | Anand S.Relkar ,K.N.Nandurkar, P.J.Pawar | Mechanical | Predicting Production Quantity by Intergrating Monte Carlo Simulation and Regression Analysis | ICMAX |
101 | Anand S.Relkar , Dr.K.N.Nandurkar , Assem Ranade | Mechanical | A Survey of Factors affecting OEE in Engineering Industries | ICMAX |
102 | Dnyandeo D.Shinde , Ramjee Prasad,Dr.Rajendra G.Tated | Mechanical | Ranking of Total Productive Maintenance pillars using Analytical Hierarchy Process | |
103 | Vishal N.Sulakhe,R.S.Dalu | Mechanical | Performance Evaluation of Composite Electrode in PMEDM of D2 Steel Using Full Factorial Design Method | |
104 | Dr.Vishal N.Sulakhe, Dr.R.S.Dalu, Dr.Samir J.Deshmukh .Prof.Pravin P.Pande | Mechanical | Performance of WC-Cu Composite as an EDM Electrode | International Conference on Science and Engineering for Sustainable Development |
105 | Anil Maheshwari,Rupesh Gawande | Mechanical | Improving Surface Quality of AA 6351 by the Stiff Burnishing Technique | Jordan Journal of Mechanical and Industrial Engineering |
106 | Anil S Maheshwari, Rupesh Gawande | Mechanical | The Role of Burnishing Process in Manufacturing Industry - A State - of -the Art Survey | IJERD |
107 | Vishal N.Sulakhe,R.S.Dalu | Mechanical | Experimetal investigation and modelling of the powder mixed electro-discharge machining of HcHcr D2 tool steel | JoRSTEM |
108 | Vishal N.Sulakhe ,Prof.Dr.R.S.Dalu | Mechanical | Effect of Nickel Powder on MRR in EDM | IEEE |
109 | A.S.Maheshwari ,Dr.R.R.Gawande | Mechanical | Surface Hardness Improvement Using Stiff Ball Burnining | International Journal on emerging trends in Technology |
110 | A.S.Maheshwari ,Dr.R.R.Gawande | Mechanical | Influence of specially designed high-stiffness ball burnishing tool on surface quality of Titanium alloy | ICMPC |
111 | Vishal N Sulakhe,Dr.R.S.Dalu | Mechanical | Some investigations PMEDM of D2 tool steel using different composite electrode materials | |
112 | Vishal N Sulakhe,Dr.R.S.Dalu | Mechanical | Statistical Analysis on MRR and RA in EDM of HcHcR D2 Tool Steel Using Alsic Composite Electrode | National Conference on Emerging Trends in Engineering and Technology |
113 | Dnyandeo Shinde ,Ramjee Prasad | Mechanical | Application of AHP for Ranking of Total Productive Maintenance Pillars | Wireless Personal Communications |
114 | A.S.Maheshwari ,Dr.R.R.Gawande | Mechanical | Effect of Newly Developed Ball Burnishing Tool On Surface Roughness of AA6351 | ICQUEST |
115 | Dnyandeo Shinde,Rajendra G.Tated | Mechanical | Review of Indian Education System | IEEE |
116 | Vishal N Sulakhe,Dr.R.S.Dalu | Mechanical | Electrical Discharge Machining : A Structured Review | International conference on Advances in Civil and Mechanical Enginering Systems |
117 | Dnyandeo Shinde,Vikram Kolhe | Mechanical | Friction Stir Welding and Processing : An Overview | IJETT |
118 | Vishal N.Sulakhe,Mandar R Tawarkar , Amol R Wankhede | Mechanical | Thermal Barrier Coating on IC-Engines: Review | International Journal of Research in Aeronautical and Mechanical Engineering |
119 | Chandrajit P.Ahire , Anand S. Relkar | Mechanical | Correlating Failure Mode Effect Analysis (FMEA) & Overall Equipment Effectiveness (OEE) | Elsevier Ltd. |
120 | AS Relkar, KN Nandurkar | Mechanical | Optimizing & analysing overall equipment effectiveness (OEE) through design of experiments (DOE) | Elsevier Ltd. |
121 | A.S.Relkar | Mechanical | Risk analysis of equipment failure through failure mode and effect analysis and fault tree analysis | Journal of Failure Analysis and Prevention |
122 | A.S.Relkar, P.R.Baviskar | Mechanical | Optimizing Overall equipment effectiveness through simulation analysis | AIP Conference Proceedings 2018 |
123 | Vishal Sulakhe | Mechanical | Design and Analysis of Jet Wind Turbine Blades | Lambert Academic Publishing |
124 | Dnyandeo shinde ,Ramjee Prasad , Manas Srivastava | Mechanical | Yog Nidra: A therapy to control human mind and body | |
125 | Mikhil Bhavsar | Mechanical | A Creative support professional with a record of increased responsibility in education sector. | Lambert Academic Publishing |
126 | Mechanical | |||
127 | Dr.A.D.Lokhande,Prof.D.S.Dhondge,Ketan Patil | Mechanical | Review Paper on Flow through Venturi in Carburetor | The International journal of analytical and experimental modal analysis |
128 | Hemant A.Pagar, Dr.Anil S.Maheshwari,Dhanashree A.Pagar | Mechanical | Stealth Technology and Evolution of Stealth | IJIRSET |
129 | Dr.Anil S.Maheshwari, Dr.Vishal Sulakhe, Sachin Bagul | Mechanical | A Review paper on Redesign of Front Shocker Bracket for weight optimization | The International journal of analytical and experimental modal analysis |
130 | Pratik Ahire | Mechanical | A Review paper on Analysis and Performance Evaluation of Vehicle Crash Box for Material and Shape Optimization | IJAEMA JOURNAL |
131 | Pratik Ahire | Mechanical | Performance Evaluation of Circular and Hexagonal Shaped Crash Box for Improved Passenger's Safety | JETIR |
132 | Yash V.Dalvi,Shailesh M.Kawale,Akshay A.Sathe,Pushpak B.Desale | Mechanical | Design of Fixture to Reduce Loading - Unloading Time on VMC Machine | IJARIIE |
133 | Dr.Shinde Dnyandeo D.,Prajwal yogesh R. | Mechanical | Hybrid Electric Vehicle | IFERP |
134 | Sachin Bagul,Dr.Anil S. Maheshwari | Mechanical | Weight Optimization of Front shocker Bracket of Honda Passenger Vehicle | IJRAR |
135 | Dr.A.D.Lokhande,Prof.D.S.Dhondge,Pratik ahire | Mechanical | A Review paper on Analysis and Performance Evaluation of Vehicle Crash Box for Material and Shape Optimization | The Journal of Analytical and Experimental model analysis |
136 | Pratik Ahire ,A.D.Lokhande,D.S.Dhondge | Mechanical | performance Evcaluation of Circular and Hexagonal Shaped Crash Box for Improvced Passenger's Safety | JETIR |
137 | Sandesh Shivaji Thomare | Mechanical | Nano Electro Mechanical Systems | JETIR |
138 | Prof.Ghodake A.P.,Prof.Rakhade R.D.,Prof.Maheshwari.A.S. | Mechanical | Effect of Burnishing Process on Behavior of Engineering Materials - A Review | IOSR-JMCE |
139 | Dr.Anil S.Maheshwari,Sachin Bagul | Mechanical | A Review paper on Redesign of Front Shocker Bracket for weight optimization | |
140 | Dr.Anil S.Maheshwari,Sachin Bagul | Mechanical | Weight Optimization of Front shocker Bracket of Honda Passenger Vehicle | |
141 | BrajbhushanR.Yadav | Mechanical | Automatic Pothole Repair Technology | IJSRD |
142 | Sanket T.Tekade | Mechanical | Suspensionless Soapbox Car | IRJET |
143 | D.S.Dhondge ,K.P.Pawar, A.S.Maheshwari,N.L.Bhirud,G.V.Mahajan ,A.D.Lokhande | Mechanical | Optimization of Weight for Spring of Two-Wheeeler Suspension Issuing Composite Material | IJRTE, Blue Eyes Interlligence Engineering & Sciences Publication |
144 | Milind Devidas Sonawane | Mechanical | Automatic Stair Climbing Trolley | IJSRD |
145 | Lavkesh Patil,Kamlesh Kale,Yashraj Salunkhe ,Rushikesh Sonar | Mechanical | Solar Operated Grass Cutter with Inbuilt Fertilizer Sprayer | IJSRD |
146 | Kamlesh Kale | Mechanical | Solar Operated Grass Cutter with Inbuilt Fertilizer Sprayer | IJSRD |
147 | B.R.Magar,Dr.A.D.Lokhande, G.V.Mahajan | Mechanical | Structural Analysis of Electric Three-Wheeler Chassis | |
148 | Mishra, R., Burela, R.G. and Pathak, H. | Mechanical | Crack interaction study in piezoelectric materials under thermo-electro-mechanical loading environment | International Journal of Mechanics and Materials in Design (Springer) |
149 | Mishra, R. and Burela, R.G. | Mechanical | Thermo-electro-mechanical fatigue crack growth simulation in piezoelectric solids using XFEM approach | Theoretical and Applied Fracture Mechanics (Elsevier) |
150 | Mishra, R., and G Y SANDESH REDDY | Mechanical | An EFGM approach for permeable, semi-permeable and impermeable crack interaction study in 2D piezoelectric domains | Mechanics of Advanced Materials and Structures (Taylor & Francis) |
151 | Ranjan Kumar Mishra, G. Y. Sandesh Reddy, Himanshu Pathak | Mechanical | The Understanding of Deep Learning: A Comprehensive Review | Mathematical Problems in Engineering (Hindawi) |
152 | Pathak, H., Mishra, R.K., Singh, A. and Singh, I.V. | Mechanical | Simulation of 3-D Cracks under Thermo-Mechanical Environment | Materials Today (Elsevier) |
153 | Mishra, R.K. | Mechanical | A Review on fracture mechanics in piezoelectric structures | Materials Today (Elsevier) |
154 | Mishra, R.K. | Mechanical | Engine Performance Characteristics of 4-Stroke Compression Ignition Engine Fuelled with Blends of Biodiesel Extracted from Waste Cooking Oil | Journal of Emerging Technologies and Innovative Research |
155 | Mishra, R.K., Gupta, B, Bharat | Mechanical | Computational Study of Convective Heat Transfer in Porous Media by Finite Volume Method | Journal of Emerging Technologies and Innovative Research |
156 | Mishra, R.K | Mechanical | Computational study of conductive heat transfer in porous media by finite volume method | Journal of Emerging Technologies and Innovative Research |
157 | Maurya, S. K., Mishra, R. K., Gupta, D., & Agarwal, N. | Mechanical | “Sustainable Manufacturing for Industry 4.0 | Journal of the Gujarat Research Society |
Sr. No. | Copyright Details | Copyright Submitted/Received |
1 | A book titled “A Walking Ro-Bot ” is published in Jan.2023 | LAMBERT Academic Publishing ISBN- 97862056330144 |
Name of Department | Name of BOS-Chairperson | Name of Internal Members with Designation | Name of External Members with organization name & Designation |
---|---|---|---|
Mechanical Engg | Dr. Vishal Sulakhe | Dr. A. S. Relkar, Dr. A.D. Lokhande, Dr. Vinay kumar, Mr. Durgesh Borse, Mr. Akshay Tajane, Mrs. Sneha Shirke | 1. Dr. S. D. Kalpande, Professor, Mechanical Engg. GCOERC, Nashik 2. Dr. Prashant Kushare, Professor, KKWIEE& R, Nashik |